192.168.25.1 IP Address

192.168.25.1 IP Address is used by Netcomm NP725 Wireless access point. NP725 is indoor Power over Ethernet (PoE) Wireless Access Point.

192.168.25.1 Setup for NP725

Preparation

A computer is needed to configure NP725 via its web management interface. After completing hardware installation, the administrator can configure the NP725 via web browser with JavaScript enabled, such as Mozilla Firefox 2.0 or Internet Explorer version 6.0 and the above.

The default LAN IP address of NP725 is listed as following:

IP Address: 192.168.25.1

Subnet mask: 255.255.255.0

If the IP address of the administrator’s PC is not assigned via DHCP, then a static IP address assigned to the administrator’s computer within the same subnet as NP725 is needed. The following listed Address as examples:

IP Address: 192.168.25.100

Subnet mask: 255.255.255.0

Wireless LAN Access Point Connection

Please follow the steps below to install the hardware of NP725.

1. Locate the wireless LAN access point at the best location. The best location for NP725 is usually at the center of a wireless network.

2. Connect the wireless LAN access point to your other network equipment. Connect an Ethernet cable to the NP725’s LAN port and connect the other end of the cable to a switch, a router, or a hub. The access point will be connected to your existing wired LAN network.

3. There are two options to supply power to NP725.

1) Connect the DC power adapter to the power socket. Please note that using a different adapter may damage the product.

2) Connect a PoE capable device (switch or PSE) to the LAN port.

Now, the Hardware Installation has been completed.

Basic Configuration

NP725 provides the web management interface for configuration. After completing hardware installation, the administrator can configure the NP725 via web browsers with JavaScript enabled, such as Mozilla Firefox 2.0 or Internet Explorer version 6.0 and the above.

The default LAN IP address of NP725 is listed as follows:

IP Address: 192.168.25.1

Subnet Mask: 255.255.255.0

If the IP address of the administrator’s PC is not assigned via DHCP within the same subnet as NP725’s, then a static IP address assigned to the administrator’s computer within the same subnet as NP725’s is needed. The following IP address is listed as an example:

IP Address: 192.168.25.100

Subnet Mask: 255.255.255.0

Once NP725 has been connected, the Administrator Login Page will appear. Enter “admin” for both the default user name and password in the User name and Password fields, and then click the OK button to log in.

User name: admin

Password: admin

Router Diagnostics

If you type 192.168.16.1 in your browser and don't see router administration page then you may have to check following issues.

Check that your router is using 192.168.16.1 as a default address

Check that your router is connected to your computer (it is better to use wired connection during router setup)